Spectrum Analyzer Product List and Ranking from 10 Manufacturers, Suppliers and Companies

[Rental] Wireless communication and battery power measurement solutions

Introducing measurement solutions used in IoT device and product development!

At Yokogawa Rental & Lease Corporation, we offer measurement solutions that are useful for IoT device and product development. Please make use of our services for concerns such as: "I want to conduct pre-validation of communication modules and embedded devices' digital wireless standards." "I want to measure small power noise superimposed on the power rail with high accuracy." "I want to simplify the evaluation of the wireless section of WLAN-equipped devices." 【Products Offered (Excerpt)】 ■ Signal Spectrum Analyzer 'FSV' ■ Infiniium S Series Oscilloscope and Power Rail Probe 'DSOS204A, N7020A' ■ Wireless Connectivity Test Set 'MT8862A' *For more details, please refer to the PDF document or feel free to contact us.

Company：横河レンタ・リース
Price：Other

Measurement and Inspection
Vehicle Management System
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application Example: Conducted EMI Measurement System

A system that enables easy and inexpensive conducted EMI measurements using an EMI spectrum analyzer.

This is a notice from Micronics Corporation regarding the "Conducted EMI Measurement System (Application Document)." A system that enables easy and cost-effective conducted EMI measurements using an EMI spectrum analyzer. ■□■ Solution ■□■ ■ EMI Spectrum Analyzer / MSA438E - Equipped with the necessary functions for conducting EMI tests (QP, average detection, and RBW: 9kHz, 120kHz [6dB]), making it ideal for EMI measurements. - As a preliminary test for EMI testing, it can reduce the amount of countermeasures required and the number of times the measurement site is used, significantly lowering running costs. ■ Dedicated EMI Measurement Software / MAS430 - When used, it allows you to specify the standards you want to measure, such as CISPR11, 22, EN55011, 22, FCC Part 15, VCCI, etc., and automatically sets the necessary parameters like bandwidth and threshold level. For other functions and details, please download the catalog or contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Application Example] Simplified Measurement in Technical Standard Compliance Testing, etc.

Characteristic testing of wireless communication devices

It is possible to easily implement transmission characteristic tests for obtaining certifications and approvals in various countries, such as the Technical Standards Conformity Test (TELEC). 【Features】 ○ By connecting the signal output from the EUT's antenna (RF) terminal to a spectrum analyzer or power meter, it is possible to evaluate each item of the transmission characteristic test. ○ By using a shielded box, it is possible to prevent the influence of external radio waves and electromagnetic waves on the EUT. ○ Frequency deviation ○ Occupied frequency bandwidth ○ Intensity of spurious emissions ○ Deviation of antenna power ○ Adjacent channel or out-of-band leakage power ○ Leakage power when the carrier is off ● For other functions and details, please download the catalog.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Application Example] Evaluation of Noise Resistance in Information and Communication Devices

Evaluation of Noise Resistance in Information and Communication Equipment

Verification of the correlation between the type and magnitude of noise and communication speed, as well as resistance 【Features】 ○ Evaluate the impact on the installed EUT (mobile phone module) by oscillating the signal output from the signal generator (SG) within a radio wave anechoic chamber. ○ The frequency range (800MHz to 2.5GHz) is targeted to detect EMC issues in the early design phase and measure the effective throughput of communication using the EUT and control device programs. ○ Verify the correlation between the type and magnitude of noise and communication speed, as well as resistance. ● For other functions and details, please download the catalog.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radiation Noise Simple Check

[Application Example] Noise checking at a low cost! Simple measurement of transmission frequency.

The system can perform relative evaluations for debugging purposes during pre-assessments before formal testing or in the event of failure. It is a popular simple measurement tool because it allows for low-cost checks of noise components and enables subsequent system upgrades. It can simply measure the frequency bands emitted by the DUT. It is particularly effective for EMC noise countermeasures, radio law compliance, and confirming unwanted radiation. In formal tests using a shielded room, while it may not be possible to identify absolute values, it is possible to check whether unspecified frequencies are being emitted outside the specified limits by combining a spectrum analyzer with a simple loop antenna. 【System Configuration】 ■ EMI Spectrum Analyzer [MSA438E] ■ N to SMA Coaxial Cable 1.5m ■ Small Loop Antenna (set of two sizes) *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spectrum Analyzer MSA400 Series

Handheld spectrum analyzer with a sweeping method.

Compact, lightweight, and ultra-low price. Performance and functionality that rival large bench-type models. 【Features】 ■ Compact and lightweight at 1.8kg ■ Large color display ■ 4 hours of battery operation ■ Data storage on USB memory ■ High-speed USB transfer ■ Accurate frequency measurement with PLL synthesizer ■ Average noise level -127dBm ■ 100dB display dynamic range ■ Easy operation with AUTO mode

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simple check of magnetic field radiation noise from LED lighting fixtures.

[Application Example] With easy measurements, you can quickly evaluate the effectiveness of countermeasures, contributing to reduced development time and cost savings.

【Product Introduction】 ■Spectrum Analyzer MSA438 Compact and lightweight. A genuine spectrum analyzer with performance and features that rival those of large bench-type models. The most popular model in the MSA400 series. - Measurement frequency: 50kHz to 3.3GHz ■Loop Antenna MAN120 A small loop antenna with a diameter of 40 cm, suitable for measuring low frequencies.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Application Example] Distortion and Adjacent Channel Characteristics of RF Transmission Amplifiers

[Application Example] Signal Analyzer MSA500 Series / Measurement Mode

In high-frequency transmission amplifiers, if the distortion is large, the waveform becomes distorted, resulting in a significant increase in unwanted radio waves leaking into adjacent channels. To observe the effects of improving amplifier characteristics, it is necessary to quantitatively confirm the impact on adjacent channels. Using the MSA500 series, this can be easily verified. 【Product Introduction】 ■ Handheld Spectrum Analyzer MSA500 Series *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Application Example] VSWR Bridge Usage Example

[Application Example] Simple Measurement Method for Impedance

The input and output of high-frequency circuits are typically required to be 50Ω. While it is possible to measure using an impedance analyzer or other measurement methods during verification, using the MVS300 allows for easy and simple measurements. 【Product Introduction】 ■ Handheld Spectrum Analyzer MSA338TG ■ Handheld Spectrum Analyzer MSA438TG ■ VSWR Bridge MVS300 *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radio Law and IEEE Simplified Testing for ZigBee Modules

[Application Example] A system that conducts simple tests in accordance with the Radio Law and IEEE using the Signal Real-Time Spectrum Analyzer.

By combining the Signal Real-Time Spectrum Analyzer (MSA500 series) with an anechoic chamber, simple measurements of RF transmission characteristics tests such as technical standards conformity tests (Giteki) and IEEE tests for antenna-integrated equipment can be conducted. By limiting the applications and specifications, it is possible to upgrade the system at a low cost. Physical layer testing for ZigBee involves technical standards conformity certification (Giteki) and IEEE802.15. 【Product Introduction】 ■ Handheld Spectrum Analyzer MSA558 ■ Anechoic Chamber Taurus Series MY1530 ■ I/F Module *For more details, please refer to the PDF materials or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

How to write antenna calibration data to a spectrum analyzer.

[Application Example] You can connect the antenna and spectrum analyzer that the customer has to measure electric field strength.

Typically, to check the frequency and strength of radio waves emitted from wireless communication devices, electric field strength measurements (dBμV/m) are conducted. When using a spectrum analyzer (MSA400 series) in combination with our dipole antennas (M401 to M407), the calibration data (antenna gain) is already reflected, allowing for easy electric field strength measurements based on the settings of the spectrum analyzer. However, if you are using an antenna that you own for electric field strength measurements, you will need to write the calibration data into the spectrum analyzer. By using the PC software (MAS400), you can easily write the calibration data. 【Product Introduction】 ■ Handheld Spectrum Analyzer MSA400 Series *For more details, please refer to the PDF document or feel free to contact us. 【System Configuration】 ■ Spectrum Analyzer MSA400 Series ■ USB Cable MI400 ■ PC Software *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Visualization of modulated signals using a signal analyzer.

[Application Example] Various modulated signals can be visually observed using a handy real-time signal analyzer.

【Product Introduction】 ■ Signal Analyzer MSA538 *For more details, please refer to the PDF document or feel free to contact us. 【System Configuration】 ■ Signal Analyzer MSA538 ■ Lithium-ion Battery MB400 ■ SMA-SMA Cable 1.5m MC303 ■ Conversion Adapter N(P)/SMA(J) MA306 *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optimization of weak signal measurement using a spectrum analyzer.

[Application Example] By optimizing the spectrum analyzer, it becomes possible to capture weak signals.

All spectrum analyzers are inevitably affected by noise generated internally. The average noise level defines the impact of this noise. This is an important factor when measuring weak signals, as it becomes impossible to measure signals that fall below the average noise level. Therefore, the key point is how effectively to keep this average noise level low. Additionally, if signals cannot be captured even after optimizing the settings of the spectrum analyzer, measurement can be made possible by amplifying the signal. 【Product Introduction】 ■ Signal Analyzer MSA538 ■ Low Noise Amplifier MAP302 *For more details, please refer to the PDF document or feel free to contact us. 【System Configuration】 ■ Signal Analyzer MSA538 ■ Low Noise Amplifier MAP302 ■ PC Software MAS500 ■ Others (various cables, adapters, etc.) *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Methods to prevent erroneous measurements due to saturation of the spectrum analyzer.

[Application Example] This introduces a method to prevent erroneous measurements caused by saturation due to strong power signal inputs outside the measurement frequency band in a spectrum analyzer.

When a signal above an appropriate level is applied to the 1st mixer of the spectrum analyzer, saturation occurs, resulting in harmonic distortion and spurious signals, making accurate measurements impossible. Even signals outside the frequency measurement range can lead to incorrect measurements if they are above an appropriate level. 【Product Introduction】 ■ Spectrum Analyzer / Signal Analyzer *For more details, please refer to the PDF materials or feel free to contact us. 【System Configuration】 ■ Signal Analyzer MSA500 Series ■ Spectrum Analyzer MSA400 Series ■ Spectrum Analyzer MSA300 Series ■ Attenuators, filters, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Application Example] C/N Ratio Measurement Using Channel Power Measurement

【Application Example】 Easily measure C/N ratio with a handy spectrum analyzer. Simplify the assessment of stable reception for digital broadcasts and more.

In digital modulation communication such as digital broadcasting, the carrier-to-noise ratio (C/N ratio) is an important indicator of whether stable reception can be achieved. A deterioration in the C/N ratio leads to a rapid increase in the bit error rate (BER), making it impossible to correctly reproduce the transmitted data. Our handheld spectrum analyzer MSA438 can measure this C/N ratio using the "channel power measurement" function. ● Accurate measurement and evaluation with a full-fledged spectrum analyzer ● Easy saving of measurement results (screen, data) to USB memory, simplifying report creation ● Handy type with easy settings for field use (compact, lightweight, battery-operated for 4 hours), no commercial power outlet required 【Product Introduction】 ■ Spectrum Analyzer MSA438 *For more details, please refer to the PDF document or feel free to contact us. 【System Configuration】 ■ Spectrum Analyzer MSA438 ■ Dedicated Battery MB400 *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Application Example: Telemetry Solution

[Application Example] Enables simultaneous reception of multiple channels in animal ecology research telemetry using a handheld spectrum analyzer.

In recent years, due to the increase in population of wildlife that is causing damage to agriculture and railways, telemetry transmitters are used for ecological surveys of these animals. In 2008, the "Radio Equipment for Animal Detection Reporting System of Specified Low Power Radio Stations in the 150 MHz Band" was enacted, and the 150 MHz band was allocated for telemetry transmitters. Typically, a dedicated receiver is used for exploration, but it can only observe one channel at a time. By using the MSA338 handheld spectrum analyzer, it is possible to observe multiple channels simultaneously, significantly improving survey efficiency. [Product Introduction] ■ Spectrum Analyzer MSA338 *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Method for expanding the dynamic range of a spectrum analyzer equipped with a tracking generator.

[Application Example] Method for Expanding the Dynamic Range of Spectrum Analyzers Equipped with Tracking Generators (TG) Using Low-Noise Amplifiers

This introduces a method for expanding the dynamic range of spectrum analyzers equipped with a tracking generator (TG) by using a low-noise amplifier. 【Product Introduction】 ■ Signal Analyzer MSA538TG ■ Spectrum Analyzer MSA338TG ■ Spectrum Analyzer MSA438TG ■ Low Noise Amplifier MAP302 *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Checking television frequency channels using a handheld spectrum analyzer.

[Application Example] Understand the impact of mixed and airborne noise, check the reception level, and propose improvements to the viewing environment.

By understanding the reception status and keeping a record, we promote maintenance of TV viewing equipment within the apartment and proposals for replacing coaxial cables. Additionally, we select the antenna reception direction and fix the installation position when installing parabolic antennas and boosters. 【Product Introduction】 ■ Spectrum Analyzer MSA438 *For more details, please refer to the PDF document or feel free to contact us. We grasp the target TV frequency and use the [SAVE function] of the MSA400(300) series to record the current status of the relevant frequency band. 【System Configuration】 ■ Spectrum Analyzer MSA438 ■ Conversion Adapter MA308 N(P)/BNC(J) 50Ω/75Ω *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

How to protect equipment from excessive input.

[Application Example] Protects equipment from unexpected excessive input during CATV line quality surveys and electric field strength surveys. Safe for measurement beginners.

【Product Introduction】 ■Spectrum Analyzer MSA438 Compact and lightweight. A full-fledged spectrum analyzer with performance and features that rival large bench-type models. The most popular model in the MSA400 series. - Measurement frequency: 50kHz to 3.3GHz ■Spectrum Analyzer MSA458 Covers most applications in wireless information communication with an 8.5GHz bandwidth. - Measurement frequency: 50kHz to 8.5GHz

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example of measurement of pilot signals transmitted from a satellite.

[Application Example] Observation of satellite waves, etc., in outdoor settings.

【Product Introduction】 ■Spectrum Analyzer MSA438 Compact and lightweight. A full-fledged spectrum analyzer with performance and features that rival large bench-type models. The most popular model in the MSA400 series. - Measurement Frequency: 50kHz to 3.3GHz By converting signals received in the 7.9 to 14.5GHz range with a parabolic antenna to low frequency using a downconverter attached to the parabolic antenna, it can measure signals in the 50kHz to 3.3GHz range with our handheld spectrum analyzers (MSA300, MSA400 series). This enables measurements while moving or observing specific satellite waves. Our handheld spectrum analyzer is compact, lightweight, and battery-operated, making it very advantageous for field measurements. In particular, the MSA400 series allows for easy management by directly writing images/received status during measurements to a USB memory stick. The product price is also reasonable, minimizing the introduction costs.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reference level unit at the time of measurement

[Application Examples] Overview of General Units and Calculation Method for Noise

【Product Introduction】 ■Spectrum Analyzer MSA400 Series Compact and lightweight. A full-fledged spectrum analyzer with performance and features that rival those of large bench-type models. When looking at documents related to radio waves or specifications of wireless communication equipment, various units appear. Here, we will explain the units that can be set on our spectrum analyzers (MSA300/400 series) and the units used during noise measurement.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ways to improve work efficiency at night.

[Application Example] This addresses the issue of not being able to read the soft key text when using a spectrum analyzer in a dark environment.

【Product Introduction】 ■Spectrum Analyzer MSA400 Series Compact and lightweight. A full-fledged spectrum analyzer with performance and features that rival those of large bench-type models.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The relationship between the amplitude of the oscilloscope and the spectrum analyzer.

[Application Example] The relationship of amplitude when measuring a sine wave signal with an oscilloscope and spectrum analyzer.

【Product Introduction】 ■ Signal Analyzer MSA500 Series Equipped with both real-time method using Fast Fourier Transform (FFT) and traditional sweeping method. Each method can utilize its respective advantages. ■ Spectrum Analyzer MSA400 Series Compact and lightweight. A full-fledged spectrum analyzer with performance and functionality that rivals large bench-type models. Both oscilloscopes and spectrum analyzers are devices that measure electrical signals. The measurement results of an oscilloscope are displayed on the screen with the horizontal axis representing time and the vertical axis representing amplitude. On the other hand, the measurement results of a spectrum analyzer are displayed with the horizontal axis representing frequency and the vertical axis representing amplitude. I will explain the relationship of amplitude when measuring a sine wave signal with both an oscilloscope and a spectrum analyzer.

Company：マイクロニクス
Price：Other

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spectrum Analyzer MSA438

Compact, lightweight, low power consumption, low cost.

This is an announcement from Micronics Corporation regarding the "Spectrum Analyzer MSA438." Despite being a handheld type, it offers performance that rivals larger models. ■ Measurement Frequency: 50kHz to 3.3GHz ■ Application Fields: Mobile phones, 2.4GHz band wireless LAN, 2.5GHz band WiMAX, RF-ID, broadcasting ■ Measuring Functions: Channel power measurement, adjacent channel leakage power measurement, occupied bandwidth measurement, electric field strength measurement, magnetic field strength measurement ■ Average Noise Level ・Typical Value: -127dBm at 1GHz ・Sweep Mode: -117dBm at cf 1GHz, RBW 3kHz

Company：マイクロニクス
Price：100,000 yen-500,000 yen

others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Remote Control USB Spectrum Analyzer

The EMC Desktop Spectrum Analyzer X version solves all EMC issues with a very wide range and high precision.

"HF-6060 V4 X Main Specifications" ● Measurement Frequency Range: 10MHz to 6GHz ● Noise Level: -135dBm (-150dBm with preamp) ● Resolution (RBW): 3KHz to 50MHz ● Level Accuracy: ±2dB "HF-6080 V4 X Main Specifications" ● Measurement Frequency Range: 10MHz to 8GHz ● Noise Level: -145dBm (-165dBm with preamp) ● Resolution (RBW): 1KHz to 50MHz ● Level Accuracy: ±2dB "HF-60100 V4 X Main Specifications" ● Measurement Frequency Range: 1MHz to 9.4GHz ● Noise Level: -155dBm (-170dBm with preamp) ● Resolution (RBW): 200Hz to 50MHz ● Level Accuracy: ±1dB "Common Specifications" ● Input: 50Ohm SMA RF-input (f) ● Included Antenna: OmniLOG90200 ● Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm², etc. ● PC Interface: USB ● Main Unit Size (L/W/D), Main Unit Weight: 210x136x26 mm, 1600g

Company：ウェーブクレスト
Price：100,000 yen-500,000 yen

Other measuring instruments
others
Spectrum Analyzer

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Remote Control Spectrum Analyzer (19-inch)

Possesses an excellent track record for remote monitoring applications of RF signals.

It is a device referred to as a remote monitoring system for radio wave environments, going beyond the category of spectrum analyzers. It enables real-time display and measurement of mobile radio base station electric fields, digital television signals, wireless signals, and radar signals via LAN. It has a proven track record in monitoring airports and mobile base stations overseas. Radio wave monitoring can be conducted without the need for measurement personnel to visit the site. 【Main Features】 • Full remote control: Full remote control is possible from anywhere using devices such as PCs, PDAs, iPads, and smartphones. • RSA analysis: With the optional software "EMF Monitor," analysis can be freely conducted from a centralized location. • Remote control via LAN/WLAN or USB. • Fits standard 19-inch (approximately 48 cm) racks. • Slim and compact.

Company：ウェーブクレスト
Price：Other

Other measuring instruments
others
Spectrum Analyzer

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Digital Spectrum Analyzer 9KHz to 7.5GHz

High-performance spectrum analyzer that meets the demands of all RF applications.

The GA40XX series is a compact and lightweight portable spectrum analyzer that offers excellent cost performance, meeting the demands of various RF applications. It features an 8.5-inch TFT color LCD display, making settings and alerts very easy to read. The operation buttons are also clearly arranged for user convenience. The GA40XX series comes standard with USB, LAN, and RS232 communication interfaces, virtual terminal display, and control & remote network access. This spectrum analyzer is widely adaptable across many fields, including scientific education, development, and industrial production.

Company：ウェーブクレスト
Price：Other

Other measuring instruments
others
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Handheld Spectrum Analyzer HSA1000 Series

Frequency range of 9 kHz to 3.6 GHz. The 8-inch LCD automatically adjusts the screen backlight according to ambient light, making it convenient and efficient for field testing.

- Frequency range from 9 kHz to 1.6 GHz / 3.6 GHz - -160 dBm DANL (Displayed Average Noise Level) - Phase noise -80 dBc / Hz @ 1GHz @ 10 kHz offset - Minimum resolution bandwidth (RBW) of 10Hz - Total amplitude accuracy of 1.5dB - EMI pre-compliance test capability, with optional EMC test software available - Standard pass/fail onsite test alert function - Lithium-ion battery with a maximum operating life of 4 to 6 hours - Optional 1.6GHz / 3.6GHz tracking generator, 3.6GHz signal generator - Standard GPS receiver, optional antenna, capable of recording latitude/longitude information and test information - 8-inch (1024 * 768) IPS LCD touchscreen with wider viewing angles and an integrated light sensor that adjusts the screen backlight according to ambient light.

Company：ウェーブクレスト
Price：Other

others
Spectrum Analyzer

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spectrum Analyzer 9kHz - Maximum 1.5GHz OWON

Effectively identifies nearby signals with a minimum resolution bandwidth (PBW) of 1Hz. Offers multiple extended function modes.

XSA800 Series: Frequency range 9kHz-1.5GHz (maximum), -160 dBm displayed average noise level (DANL)

Company：ウェーブクレスト
Price：Other

others
Spectrum Analyzer

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact and lightweight spectrum analyzer 9KHz to a maximum of 44GHz

Adopts a compact portable box structure that is small, lightweight, low power consumption, and convenient for carrying.

It adopts a compact portable box structure that is small, lightweight, low power consumption, and convenient for carrying. It utilizes miniaturized integrated design technology for wideband millimeter-wave receivers, full-phase synchronization technology based on wideband VCO, full digital intermediate frequency design technology, and microwave composite multilayer circuit board design technology, achieving high-performance indicators and ensuring the economic efficiency of the product. The 4041 series consists of four models. Since all products are equipped with a preamplifier across the entire spectrum, very high reception sensitivity can be obtained at any frequency point. Furthermore, the integrated design of a 12.1-inch high-brightness LCD and a capacitive touchscreen, along with a combination design of large buttons and virtual buttons, enhances operational convenience. Regarding performance indicators, it features excellent average noise level and phase noise indicators, as well as high-speed scanning. The measurement functions include optional modes such as interference analyzer channel scanner, AM/FM/PM analyzer, power meter, and various measurement functions such as channel power, occupied bandwidth, adjacent channel power, audio demodulation, emission mask, and carrier-to-noise ratio.

Company：ウェーブクレスト
Price：Other

Other analytical equipment
Spectrum Analyzer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spectrum Analyzer Product List and Ranking from 10 Manufacturers, Suppliers and Companies | IPROS

Spectrum Analyzer Manufacturer, Suppliers and Company Rankings

Spectrum Analyzer Product ranking